The Live Pro 1200 uses a 1200W short arc discharge lamp (Osram or Philips) which can reach its maximum luminousity through a double optic system. The great quantity and variety of effects the Live Pro 1200 is equipped with is impossible to be found in any other motorized spot. All the functions are explained in the technical features. Among the various novelties we are glad to draw your attention on:
• CYM color mixing utilizable also with sharp beam (with no frost or prisms).
• The Live Pro 1200 is equipped to install the accessory Light Deflector, that allow also fast displacement of the light beam.
• Automatic circuit for the regulation of the air flux in function of the temperature.
• Opto-isolated DMX with display and immediate searching of the selected channel.
• DMX reset which can operate manually by pressing the key located on the spot or from the controller.
• 35% electronic dimming of the lamp. It can be activated from the controller to reduce the heat produced by the spot when this is in stand-by (function available only with the electronic ballast).
The Live is produced in 3 different versions which differ in the presence of the prism+frost, wash frost and CYM colour mixing.
The peculiarities of the 3 versions are described together with the DMX channels. The electronic ballast, produced by Studio Due and already used for the Stratos, is available upon request. The input protocol is the DMX 512. We suggest to drive the Live Pro 1200 using our Control Show 512 or any other 12-16 bit DMX controller like Case, Compulite, Scan Commander...

Available versions:
art. 9701 Live Pro 1200 for MSR 1200 SA (short arc) or HTI 1200 lamps. Professional version with all the functions included
art. 97011 Live 1200 for MSR 1200 SA (short arc) or HTI 1200 lamps. Similar to the art. 9701 but without CYM and wash frost
art. 97012 Live 1200 for MSR 1200 SA (short arc) or HTI 1200 lamps. Basic version, similar to the art. 97011, without prisms and frost and with one static gobo wheel instead of a rotating one

Available accessories:
art. 9803 Light Deflector to be installed on the Live Pro 1200 and Live 1200
art. LV/EB 1200 Electronic ballast for Live Pro 1200 and Live 1200 with power input from 190V to 255V
art. LV/EB 1200/1 Electronic ballast for Live Pro 1200 and Live 1200 with power input from 95V to 255V
art. LV/EB 1200 PFC Electronic ballast for Live Pro 1200 and Live 1200 with Power Factor Corrector for mains voltage 180/255V
art. LV/STAF Professional bracket to hang the spot and regulate its position on the vertical axis art. LV/Case Flight Case for Live Pro 1200 and Live 1200

Il Live Pro 1200 utilizza una lampada a scarica ad arco stretto da 1200W della ultimissima generazione (Osram o Philips) che permette, unitamente al doppio sistema ottico di ottenere la massima potenza luminosa. Il numero e la varietà degli effetti di cui il faro dispone, non ha eguali in nessun altro moving light, questo apparecchio racchiude in se tutto ciò che un operatore professionale può richiedere ad un faro motorizzato. Nelle caratteristiche tecniche sono ampiamente descritte tutte le funzioni e gli accorgimenti di cui questo faro è dotato. Tra le novità e utili particolarità di questo faro vogliamo ricordare:
• CYM color mixing utilizzabile anche in assenza di filtro frost o prismi. La miscelazione dei colori è ora attivabile anche sul normale fascio di luce circolare.
• Predisposizione per installare l’accessorio Light Deflector, che consente al Live Pro 1200 di effettuare anche spostamenti molto rapidi del fascio di luce.
• Circuito automatico per la regolazione del flusso d’aria in funzione della temperatura.
• DMX opto isolato con display e aggancio immediato del canale selezionato.
• Reset DMX attivabile sia manualmente, con pulsante localizzato sul faro, che tramite comando dalla centralina.
• Dimmerazione elettronica della lampada nella misura del 35% attivabile dalla centralina per ridurre il calore prodotto dal faro nei momenti di stand-by, (questa funzione è attivabile solamente in presenza dell’alimentatore elettronico).

Il Live viene prodotto in tre versioni la cui differenza riguarda la presenza o meno dei prismi + frost, del wash frost e del CYM color mixing; le specifiche delle tre versioni sono riportate nella descrizione dei canali DMX. Su tutte le versioni è disponibile come accessorio l’utilissimo e collaudato alimentatore elettronico, prodotto dalla Studio Due, che già tanto successo ha riscosso sia sullo Stratos, che come componente installato su altri prodotti. Il protocollo di ingresso è il DMX 512, per il pilotaggio raccomandiamo l’utilizzazione della nostra centralina Control Show 512, oppure di qualsiasi altra unità di controllo DMX a 12-16 bit come Case, Compulite, Avolite, Scan Commander ....

Disponibile nelle versioni:
art. 9701 Live Pro 1200 per lampada MSR 1200 SA (short arc) o HTI 1200, versione professionale completa di tutte le funzioni descritte nelle caratteristiche tecniche
art. 97011 Live 1200 per lampada MSR 1200 SA (short arc) o HTI 1200, come art. 9701, senza CYM e Wash frost
art. 97012 Live 1200 per lampada MSR 1200 (short arc) o HTI 1200, versione base, come art. 97011 senza prismi e frost, con una delle due ruote gobo fisse anziché rotanti

Accessori disponibili:
art. 9803 Light Deflector, specchio motorizzato con elettronica indipendente da installare su Live 1200 e Live Pro 1200
art. LV/EB 1200 Alimentatore elettronico per Live Pro 1200 e Live 1200 per tensione di ingresso da 190V a 255V
art. LV/EB 1200/1 Alimentatore elettronico per Live Pro 1200 e Live 1200 per tensione di ingresso da 95V a 255V
art. LV/EB 1200 PFC Alimentatore elettronico per Live Pro 1200 e Live 1200 con Power Factor Corrector per tensione ingresso 180/255V
art. LV/STAF Staffa professionale per agganciare il faro a qualsiasi struttura e poterne poi regolare la posizione sul suo asse verticale
art. LV/Case Flight Case per il Live Pro 1200 e Live 1200

LAMP
MSR 1200W SA Daylight (short arc) or - HTI 1200W SE 5400 K (short arc)
600 hours average life with magnetic ballast
800 hours average life with electronic ballast
Easy lamp replacing

OPTIC
Two optical systems, remotely selectable and programmable, 13 and 20 degrees

MOVEMENT RESOLUTION
Pan/Tilt movement 12 bit resolution
Smooth and accurate movement repeatble positioning achieved through a high performance digital control system
Closed loop position control system based on the 87C75 microprocessor

PAN
Pan displacement 370 degrees
Time for revolution: min. 3,5 sec - max. 400 sec (12 bit controller)

TILT
Tilt displacement 300 degrees
Time for revolution: min. 3 sec - max. 400 sec (12 bit controller)

COLOR SYSTEM
Full CYM color mixing, unlimited variety of colors and shades. CYM can be used also with sharp beam (without frost or prisms). High resolution stepper motors 0.9 degrees Color crossfades can be programmed at four different speeds or in real time.
2 color wheels of 5 dichroic colors + white each one, (dichroic gobos installable in one of them). Continuous rotation of the two color wheels (rainbow effect, three different speeds) - Filter conversion from 5400K to 3200K.

GOBOS
1 Rotating wheel (3 speeds) with 6 changeable rotating metal gobos or fixed crystal gobos: three bidirectional variable speeds
1 Wheel with 6 changeable rotating metal or fixed crystal gobo, fully variable speed and memory position

FROST
Continuous wash frost filter to dissolve gobo images or for diffused light
2nd frost filter (no continuous) for projection similar to a par 64

DIMMER
Dimmer to change the light beam intensity from 0 to 100%

IRIS
Iris to change the light beam opening angle

ELECTRONIC FOCUS
Continuous storable focus on booth two different optics

STROBO BLACKOUT
Black out and strobe effect with frequency regulation

PRISMS
1 prism with 5 flat projections
1 prism with 4 circular projections
Booth prisms can rotate at different speed

INPUT SYSTEM
USITT DMX 512 protocol
Opto-isolated input
Local and remote motor reset
Remote electronic lamp dimming 35%
Remote control lamp on/off
All functions autotest switch
Pan/Tilt 50% switch
Pan/Tilt 100% switch
Pan/Tilt swap switch
Pan/Tilt inversion switch

CONNECTIONS
2 canon 5 pins (male and female), 2 canon 3 pins (male and female); DMX ground lift switch

CONTROL SYSTEM
All spot functions driven by 4 powerful microprocessor
Stepping motor controlled in microstepping and PWM
Low noise during the resetting phase

SAFETY SYSTEM
Double safety relais disconnets the power in case of:
a) panel opening for the lamp replacing
b) overheating of electronic circuits or lamp
c) fan malfunctioning

POWER SUPPLY (with magnetic ballast)
Standard supply voltage 230V 50/60Hz
Built in ballast
Built in power factor corrector
Inrush current limitation
Power consumption: 8 amps

POWER SUPPLY (with electronic ballast)
Standard supply voltage 95/255V 50/60Hz
Power consumption: 230V = 7Amps - 100V = 16Amps

MECHANICAL SYSTEM
Pan and Tilt movement on double taper bearings
Transmission by a double custom renforced driving belt and double motors
Spring to maintain a constant tension for the driving belt

COOLING SYSTEM
Radial blowers for lamp cooling with automatic circuit for the  regulation of the air flux in function of the temperature
2 quiet axial fan 80x80 mm.24V DC located in the head for electronic circuits cooling
1 axial fan 120x120 mm. 24V DC 24V DC located in the base for electronic circuits cooling

DMX CHANNELS Art. 9701
Ch 1 Iris
Ch 2 Color wheel 1 with rainbow
Ch 3 Rotating gobo with rainbow
Ch 4 Shutter + strobo
Ch 5 Pan coarse
Ch 6 Pan fine
Ch 7 Tilt coarse
Ch 8 Tilt fine
Ch 9 Dimmer
Ch 10 Motors speed (4 speeds)
Ch 11 2 optics + focus
Ch 12 Color wheel 2 with rainbow
Ch 13 Rotating gobos with memory position
Ch 14 Gobos speed/gobos position
Ch 15 Magenta
Ch 16 Cyan
Ch 17 Yellow
Ch 18 Wash frost
Ch 19 Prisms + standard frost
Ch 20 Reset + lamp on/off (* lamp dimming)

DMX CHANNELS Art. 97011
Ch 1 Iris
Ch 2 Color wheel 1 with rainbow
Ch 3 Rotating gobo with rainbow
Ch 4 Shutter + strobo
Ch 5 Pan coarse
Ch 6 Pan fine
Ch 7 Tilt coarse
Ch 8 Tilt fine
Ch 9 Dimmer
Ch 10 Motors speed (4 speeds)
Ch 11 2 optics + focus
Ch 12 Color wheel 2 with rainbow
Ch 13 Rotating gobos with memory position
Ch 14 Gobos speed/gobos position
Ch 15 Prisms + standard frost
Ch 16 Reset + lamp on/off (* lamp dimming)

DMX CHANNELS Art. 97012
Ch 1 Iris
Ch 2 Color wheel 1 with rainbow
Ch 3 Static Gobo with rainbow
Ch 4 Shutter + strobo
Ch 5 Pan coarse
Ch 6 Pan fine
Ch 7 Tilt coarse
Ch 8 Tilt fine
Ch 9 Dimmer
Ch 10 Motors speed (4 speeds)
Ch 11 2 optics + focus
Ch 12 Color wheel 2 with rainbow
Ch 13 Rotating gobos with memory position
Ch 14 Gobos speed/gobos position
Ch 15 Standard frost
Ch 16 Reset + lamp on/off (* lamp dimming)

* Function available only using an electronic ballast.

DIMENSIONS
(packing box) WxDxH = 80x71x61

WEIGHT
Net weight: 31,5 kgs. Gross weight: 37,5 kgs.